ATEX SS double compression cable gland 3/4? NPT
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
ATEX SS double compression cable gland 1/2? NPT
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
ATEX SS double compression cable gland M20 X 1.5
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
Pipe Mounting Brackets
Accessories
Accessories can be provided with pressure switches to make it suitable for any particular application. Following are the major accessories are major accessories provided with pressure switches.
- .
Gauge Saver
Accessories
Gauge savers are normally a device that prevents over pressuring. They function in a similar fashion as relieve valve, only in reverse, with spring that will close off to the gauge if the pressure goes above the set pressure.
- .
Snubber
Accessories
snubber is a device used to suppress ("snub") excess force or rapid movement in pressure switches . Pressure snubbers are designed to dampen the effect of pressure pulses and spikes to assure longer service life and readability of pressure switches in harsh applications.
- .
~Type D
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type C
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type B
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type A
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
Siphon
Accessories
Siphons are used to protect the pressure switches from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. The pressure medium forms a condensate and is collected inside the coil or pigtail portion of the pressure switch siphon.
- .
SS Impulse Tube
Accessories
To protect the Pressure, Vacuum or, DP switches from the higher temperature, we provide Impulse Tubes, which is also called as Capillary Tubes. The Instrument should be installed at one end of the Impulse Tube, ensuring that there are no any leakages at that end, and the other end of the impulse tube should be connected to the process.
- .
Cu Impulse Tube
Accessories
To protect the Pressure, Vacuum or, DP switches from the higher temperature, we provide Impulse Tubes, which is also called as Capillary Tubes. The Instrument should be installed at one end of the Impulse Tube, ensuring that there are no any leakages at that end, and the other end of the impulse tube should be connected to the process.
- .
3 Valve Manifold
Accessories
These manifolds are generally used in differential pressure applications with pressure gauges, Pressure switches & pressure transmitters. Two isolation valves & one equalising valve is provided.
- .
2 Valve Manifold
Accessories
These manifolds provide a direct mounting feature with isolation & drain/calibration in a single unit. These type of manifolds can be directly mounted on the static pressure transmitter to eliminate several parts and joints.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP250
GT Series Pressure Transmitters ?
Other Products
The GT series 2 wire pressure transmitter is a highly accurate instrument with a backlit LCD display designed for industrial automation and precision measurement.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP248
Comparison test pumps
Other Products
A comparison test pump is a device by which pressure gauges can be calibrated in comparison with masterpressure gauges. These can also be used for comparison of master gauges with normal use pressure gauges after periodic intervals to detect a drift in calibration.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP248
Rigel series pressure transmitters
Pressure Transmitters
We will update you soon....
- ATEX
- CoC
- PESO
- ISI
- CE
- IP244
FC series vacuum flameproof switches
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP242
FC series low DP high proof flameproof switches
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP241
FC series hydraulic diaphragm flameproof switches
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP240
FC series flameproof switches
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP239
DS series DP industrial switches
Dual Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP237
DS series pressure difference industrial switches
Dual Switches
We will update you soon
- ATEX
- CoC
- PESO
- ISI
- CE
- IP236
MT series pressure difference industrial switches
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP235
DS series hydraulic diaphragm industrial switches
Dual Switches
We will update you soon....
- ATEX
- CoC
- PESO
- ISI
- CE
- IP234
MT series hydraulic industrial switches
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP233
DS series industrial pressure switches
Dual Switches
We will update you soon...
- ATEX
- CoC
- PESO
- ISI
- CE
- IP232
MT series industrial switches
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP231
SE series OEM switches
Direct Mounted Temperature Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP229
MZ series process switches
Direct Mounted Temperature Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP228
MT series industrial switches
Direct Mounted Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP227
MD series industrial switches
Direct Mounted Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP226
FE series flameproof switches
Direct Mounted Temperature Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP224
FC series flameproof switches
Direct Mounted Temperature Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP223
MZ series process switches
Temperature Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP221
MT series industrial switches
Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP220
MD series industrial switches
Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP219
FE series flameproof switches
Temperature Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP217
FC series flameproof switches
Temperature Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP216
MZ series process switches
Low Range Compound Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP214
MT series industrial switches
Low Range Compound Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP213
MD series industrial switches
Low Range Compound Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP212
FE series flameproof switches
Low Range Compound Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP210
FC series flameproof switches
Low Range Compound Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP209
MZ series process switches
High Range Compound Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP207
MT series industrial switches
High Range Compound Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP206
MD series industrial switches
High Range Compound Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP205
FE series flameproof switches
High Range Compound Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP203
FC series flameproof switches
High Range Compound Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP202
KU series OEM switches
Vacuum Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP200
MG series compact switches
Vacuum Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP199
VS1 series compact switches
Vacuum Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP198
MN / MA series compact switches
Vacuum Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP197
MZ series process switches
Vacuum Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP196
MT series industrial switches
Vacuum Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP195
MD series industrial switches
Vacuum Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP194
FE series flameproof switches
Vacuum Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP192
FC series flameproof switches
Vacuum Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP191
CK series OEM switches
Ultra Low Range PD Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP189
CF series OEM switches
Ultra Low Range PD Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP188
FP series industrial switches
Ultra Low Range PD Switches
Updating Soon...
- ATEX
- CoC
- PESO
- ISI
- CE
- IP187
MT series industrial switches
Ultra Low Range PD Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP186
MD series industrial switches
Ultra Low Range PD Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP185
FE series flameproof switches
Ultra Low Range PD Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP183
FC series flameproof switches
Ultra Low Range PD Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP182
MT series industrial switches
Low ?P High Proof Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP180
MD series industrial switches
Low ?P High Proof Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP179
FE series flameproof switches
Low ?P High Proof Pressure Difference Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP177
FC series flameproof switches
Low ?P High Proof Pressure Difference Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP176
MT series industrial switches
Low DP High Proof Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP174
MD series industrial switches
Low DP High Proof Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP173
FE series flameproof switches
Low DP High Proof Pressure Difference Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP171
FC series flameproof switches
Low DP High Proof Pressure Difference Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP170
PA series process switches
Low Range Pressure Difference Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP168
PD series process switches (M.S.)
Low Range Pressure Difference Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP167
MT series industrial switches
Low Range Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP166
MD series industrial switches
Low Range Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP165
FE series flameproof switches
Low Range Pressure Difference Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP163
FC series flameproof switches
Low Range Pressure Difference Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP162
MZ series process switches
Hydraulic Range DP Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP160
MT series industrial switches
Hydraulic Range DP Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP159
MD series industrial switches
Hydraulic Range DP Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP158
FE series flameproof switches
Hydraulic Range DP Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP156
FC series flameproof switches
Hydraulic Range DP Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP155
MZ series process switches
High Range DP Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP153
MT series industrial switches
High Range DP Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP152
MD series industrial switches
High Range DP Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP151
FE series flameproof switches
High Range DP Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP149
FC series flameproof switches
High Range DP Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP148
PD series compact switches
High Range Pressure Difference Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP145
DP series compact switches
High Range Pressure Difference Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP144
MZ series process switches
High Range Pressure Difference Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP143
MT series industrial switches
High Range Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP142
MD series industrial switches
High Range Pressure Difference Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP141
FE series flameproof switches
High Range Pressure Difference Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP139
FC series flameproof switches
High Range Pressure Difference Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP138
MZ series process switches
Hydraulic Diaphragm Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP99
MT series industrial switches
Hydraulic Diaphragm Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP98
MD series industrial switches
Hydraulic Diaphragm Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP97
FE series flameproof switches
Hydraulic Diaphragm Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP95
FC series flameproof switches
Hydraulic Diaphragm Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP94
MZ series process switches
Flanged Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP136
MT series industrial switches
Flanged Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP135
MD series industrial switches
Flanged Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP134
FE series flameproof switches
Flanged Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP132
FC series flameproof switches
Flanged Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP131
MT series industrial switches
Ultra Low Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP129
MD series industrial switches
Ultra Low Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP128
FE series flameproof switches
Ultra Low Range Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP126
FC series flameproof switches
Ultra Low Range Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP125
MT series industrial switches
Low Range High Proof Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP123
MD series industrial switches
Low Range High Proof Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP122
FE series flameproof switches
Low Range High Proof Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP120
FC series flameproof switches
Low Range High Proof Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP119
SA series OEM switches
Hydraulic Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP110
SE piston (DIN connector type) series OEM switches
Hydraulic Range Switches
...
- ATEX
- CoC
- PESO
- ISI
- CE
- IP109
DT series compact switches
Hydraulic Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP107
HM / HO 350 series compact switches
Hydraulic Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP106
HM / HO series compact switches
Hydraulic Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP105
DN / DA series compact switches
Hydraulic Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC
- ATEX
- CoC
- PESO
- ISI
- CE
- IP104
MZ series process switches
Hydraulic Range Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP103
MT series industrial switches
Hydraulic Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP102
MD series industrial switches
Hydraulic Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP101
MZ series process switches
High Proof High Range Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP92
MT series industrial switches
High Proof High Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP91
MD series industrial switches
High Proof High Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP90
FE series flameproof switches
High Proof High Range Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP88
FC series flameproof switches
High Proof High Range Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP87
MN / MA series compact switches
Low Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP117
MT series industrial switches
Low Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP116
MD series industrial switches
Low Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP115
FE series flameproof switches
Low Range Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP113
FC series flameproof switches
Low Range Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP112
CS 12 series compressor switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP85
EZ / EX series OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP84
SM series OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP83
SA series OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP82
MZ__A / MX__A series OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP81
MZ / MX series OEM switches
High Range Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP80
SE series subminiature (DIN connector type) OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP79
SE series subminiature OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP78
KU series OEM switches
High Range Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP77
DT series compact switches
High Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP76
HM series compact switches
High Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP75
MN / MA series compact switches
High Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP74
MG / ME triclover hygiene range compact switches
High Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP73
MG / ME series compact switches
High Range Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP72
MZ series process switches
High Range Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- ATEX
- CoC
- PESO
- ISI
- CE
- IP71
MT series industrial switches
High Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP70
MD series industrial switches
High Range Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP69
FE series flameproof switches
High Range Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP67
FC series flameproof switches
High Range Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66